UV fluorescent tube - traduzione in russo
Diclib.com
Dizionario ChatGPT
Inserisci una parola o una frase in qualsiasi lingua 👆
Lingua:

Traduzione e analisi delle parole tramite l'intelligenza artificiale ChatGPT

In questa pagina puoi ottenere un'analisi dettagliata di una parola o frase, prodotta utilizzando la migliore tecnologia di intelligenza artificiale fino ad oggi:

  • come viene usata la parola
  • frequenza di utilizzo
  • è usato più spesso nel discorso orale o scritto
  • opzioni di traduzione delle parole
  • esempi di utilizzo (varie frasi con traduzione)
  • etimologia

UV fluorescent tube - traduzione in russo

DISINFECTION METHOD THAT USES SHORT-WAVELENGTH ULTRAVIOLET LIGHT TO KILL OR INACTIVATE MICROORGANISMS
UVGI; UV tube; Ultraviolet disinfection; Ultraviolet Germicidal Irradiation; UV water disinfection; Ultraviolet filtration; Uv tube; UV Sterilizer; UV irradiation; UV sterilization; UV sanitizer; UV Disinfection; UV disinfection
  • Cutaway model of UV disinfection unit used in water treatment plants
  • at=fig 2.1}}
  • ''Warning for [[optical radiation]]'' applies to devices that emit UV light.
  • Compact and versatile options with UV-C LEDs
  • at=fig 5.5}}

UV fluorescent tube      
(трубчатая) люминесцентная лампа с ультрафиолетовым излучением
fluorescent lamp         
  • A 65-watt fluorescent lamp starting on a semi-resonant start circuit
  • A cold-cathode fluorescent lamp from an emergency-exit sign. Operating at a much higher voltage than other fluorescents, the lamp produces a low-amperage [[glow discharge]] rather than an arc, similar to a [[neon light]]. Without direct connection to line voltage, current is limited by the transformer alone, negating the need for a ballast.
  • Electronic ballast for fluorescent lamp, 2×58 W
  • Fluorescent lamp with an electronic ballast.
  •  A [[Sankey diagram]] of energy losses in a fluorescent lamp. In modern designs, the biggest loss is the [[quantum efficiency]] of converting high-energy UV photons to lower-energy visible light photons.
  • [[Electronic ballast]] basic schematic
  • A ''preheat'' fluorescent lamp circuit using an automatic starting switch. A: Fluorescent tube, B: Power (+220 volts), C: Starter, D: Switch (bi-metallic thermostat), E: Capacitor, F: Filaments, G: Ballast
  • The "beat effect" problem created when shooting films under standard fluorescent lighting
  •  Starting a preheat lamp. The automatic starter switch flashes orange each time it attempts to start the lamp.
  • T12 and T8]] G13 bi-pin fluorescent lamps
  • Light from a fluorescent tube lamp reflected by a [[CD]] shows the individual bands of color.
  • frameless
  • [[Capacitive coupling]] with [[high-voltage power line]]s can light a lamp continuously at low intensity.
  • This tube failed after it had been turned on many times. Too much of the thermionic emission mix had sputtered off the cathodes, instead sticking to and blackening the glass.
  • The "beat effect" problem created when shooting photos under standard fluorescent lighting
  • A [[germicidal lamp]] uses a low-pressure mercury-vapor glow discharge identical to that in a fluorescent lamp, but the uncoated [[fused quartz]] envelope allows ultraviolet radiation to transmit.
  • A helical cool-white fluorescent lamp reflected in a [[diffraction grating]] reveals the various [[spectral lines]] which make up the light.
  • Thermal image of a helical fluorescent lamp.
  • The [[color temperature]] of different electric lamps
  • Different ballasts for fluorescent and discharge lamps
  • Top: two non-integrated [[compact fluorescent lamp]]s. Bottom: two fluorescent tube lamps. Both types require a ballast in the [[light fixture]].  A matchstick, left, is shown for scale.
  • ballast]] continually heats the [[cathode]]s at the ends of the lamps. This ballast runs two F40T12 lamps in series.
  • Compact fluorescent lamp that has reached end of life because of mercury adsorption. Light is produced only by the base argon fill.
  • ballast]] for 18–20 W
  • [[Peter Cooper Hewitt]]
  • Electronic fluorescent lamp starters
  • frameless
  • frameless
  • A ''preheat'' fluorescent lamp "starter" (automatic starting switch)
  • T12 fluorescent tubes. The first two are rapid start, (for "tombstone" and socket holders respectively) while the third is an instant-start lamp. The instant-start  has a characteristic, rounded, single pin, for plugging into the spring-loaded socket holders.
  • [[Electronic ballast]]s and different compact fluorescent lamps
  • 0-7506-4637-3}}, pp. 21-12.</ref>
  • Fluorescent spectra in comparison with other forms of lighting. Clockwise from upper left: Fluorescent lamp, [[incandescent bulb]], [[candle]] flame and [[LED lighting]].
  • frameless
LIGHT SOURCE
Fluorescent light; Fluorescent light bulb; Fluorescent tube; Fluorescent lamps; CCFL; Overdriven fluorescent light; Overdriven fluorescent lights; Fluorescent lighting; Fluorescent bulb; Fluorescent lights; Flourescent tube; Tube lamp; Tube light; Fluorescent light tube; Fluorescent light-tube; Cold-cathode fluorescent lamp; Flourescent light; Flourescent light bulb; Flat fluorescent lamp; Flat (type) Fluorescent Lamp; Tubelight; Cold cathode fluorescent lamp; Fluorescent bulbs; Flourescent lights; Fluorescent lightbulb; Lamp starter; Fluorescent strip lights; Fluorescent strip light; Flourescent bulb; Vapor glow lamp; Flourescent lamp; Cold Cathode Fluorescent Lamp; Cold Cathode Fluorescent Lamp (CCFL); Glow starter; Fluorescent light bulbs; Fluorescent light-bulb; ODNO; Odno; Tube lights; Halophosphate; Fluorescent Light; Cold-cathode fluorescent lamp (CCFL); Fluorescent Lights; Fluorescent-lighting
лампа дневного света
fluorescent tube         
  • A 65-watt fluorescent lamp starting on a semi-resonant start circuit
  • A cold-cathode fluorescent lamp from an emergency-exit sign. Operating at a much higher voltage than other fluorescents, the lamp produces a low-amperage [[glow discharge]] rather than an arc, similar to a [[neon light]]. Without direct connection to line voltage, current is limited by the transformer alone, negating the need for a ballast.
  • Electronic ballast for fluorescent lamp, 2×58&nbsp;W
  • Fluorescent lamp with an electronic ballast.
  •  A [[Sankey diagram]] of energy losses in a fluorescent lamp. In modern designs, the biggest loss is the [[quantum efficiency]] of converting high-energy UV photons to lower-energy visible light photons.
  • [[Electronic ballast]] basic schematic
  • A ''preheat'' fluorescent lamp circuit using an automatic starting switch. A: Fluorescent tube, B: Power (+220 volts), C: Starter, D: Switch (bi-metallic thermostat), E: Capacitor, F: Filaments, G: Ballast
  • The "beat effect" problem created when shooting films under standard fluorescent lighting
  •  Starting a preheat lamp. The automatic starter switch flashes orange each time it attempts to start the lamp.
  • T12 and T8]] G13 bi-pin fluorescent lamps
  • Light from a fluorescent tube lamp reflected by a [[CD]] shows the individual bands of color.
  • frameless
  • [[Capacitive coupling]] with [[high-voltage power line]]s can light a lamp continuously at low intensity.
  • This tube failed after it had been turned on many times. Too much of the thermionic emission mix had sputtered off the cathodes, instead sticking to and blackening the glass.
  • The "beat effect" problem created when shooting photos under standard fluorescent lighting
  • A [[germicidal lamp]] uses a low-pressure mercury-vapor glow discharge identical to that in a fluorescent lamp, but the uncoated [[fused quartz]] envelope allows ultraviolet radiation to transmit.
  • A helical cool-white fluorescent lamp reflected in a [[diffraction grating]] reveals the various [[spectral lines]] which make up the light.
  • Thermal image of a helical fluorescent lamp.
  • The [[color temperature]] of different electric lamps
  • Different ballasts for fluorescent and discharge lamps
  • Top: two non-integrated [[compact fluorescent lamp]]s. Bottom: two fluorescent tube lamps. Both types require a ballast in the [[light fixture]].  A matchstick, left, is shown for scale.
  • ballast]] continually heats the [[cathode]]s at the ends of the lamps. This ballast runs two F40T12 lamps in series.
  • Compact fluorescent lamp that has reached end of life because of mercury adsorption. Light is produced only by the base argon fill.
  • ballast]] for 18–20&nbsp;W
  • [[Peter Cooper Hewitt]]
  • Electronic fluorescent lamp starters
  • frameless
  • frameless
  • A ''preheat'' fluorescent lamp "starter" (automatic starting switch)
  • T12 fluorescent tubes. The first two are rapid start, (for "tombstone" and socket holders respectively) while the third is an instant-start lamp. The instant-start  has a characteristic, rounded, single pin, for plugging into the spring-loaded socket holders.
  • [[Electronic ballast]]s and different compact fluorescent lamps
  • 0-7506-4637-3}}, pp. 21-12.</ref>
  • Fluorescent spectra in comparison with other forms of lighting. Clockwise from upper left: Fluorescent lamp, [[incandescent bulb]], [[candle]] flame and [[LED lighting]].
  • frameless
LIGHT SOURCE
Fluorescent light; Fluorescent light bulb; Fluorescent tube; Fluorescent lamps; CCFL; Overdriven fluorescent light; Overdriven fluorescent lights; Fluorescent lighting; Fluorescent bulb; Fluorescent lights; Flourescent tube; Tube lamp; Tube light; Fluorescent light tube; Fluorescent light-tube; Cold-cathode fluorescent lamp; Flourescent light; Flourescent light bulb; Flat fluorescent lamp; Flat (type) Fluorescent Lamp; Tubelight; Cold cathode fluorescent lamp; Fluorescent bulbs; Flourescent lights; Fluorescent lightbulb; Lamp starter; Fluorescent strip lights; Fluorescent strip light; Flourescent bulb; Vapor glow lamp; Flourescent lamp; Cold Cathode Fluorescent Lamp; Cold Cathode Fluorescent Lamp (CCFL); Glow starter; Fluorescent light bulbs; Fluorescent light-bulb; ODNO; Odno; Tube lights; Halophosphate; Fluorescent Light; Cold-cathode fluorescent lamp (CCFL); Fluorescent Lights; Fluorescent-lighting

общая лексика

флуоресцентная трубка

Definizione

ВСПЫХИВАЮЩИЕ ЗВЕЗДЫ
(типа UV Кита) , разновидность эруптивных переменных звезд, холодные красные карлики с яркими линиями водорода и кальция в спектре, у которых через несколько суток (редко - часов) наблюдается кратковременное увеличение блеска.

Wikipedia

Ultraviolet germicidal irradiation

Ultraviolet germicidal irradiation (UVGI) is a disinfection method that uses short-wavelength ultraviolet (ultraviolet C or UV-C) light to kill or inactivate microorganisms by destroying nucleic acids and disrupting their DNA, leaving them unable to perform vital cellular functions. UVGI is used in a variety of applications, such as food, surface, air, and water purification.

UV-C light is weak at the Earth's surface since the ozone layer of the atmosphere blocks it. UVGI devices can produce strong enough UV-C light in circulating air or water systems to make them inhospitable environments to microorganisms such as bacteria, viruses, molds, and other pathogens. Recent studies have proven the ability of UVC light in inactivating the novel Coronavirus (COVID-19). UVGI can be coupled with a filtration system to sanitize air and water.

The application of UVGI to disinfection has been an accepted practice since the mid-20th century. It has been used primarily in medical sanitation and sterile work facilities. Increasingly, it has been employed to sterilize drinking and wastewater since the holding facilities are enclosed and can be circulated to ensure a higher exposure to the UV. UVGI has found renewed application in air purifiers.

Traduzione di &#39UV fluorescent tube&#39 in Russo